- Premium 9H Ceramic Coating
- Superior gloss, slickness, and durability
- Maximum longevity - up to 2 years protection
- Repels and beads away dirt, water, road film, and more
Besides long-lasting protection and incredible water beading is the incredible GLOSS the 3D Ceramic Coating creates on your car’s finish! The gloss is so intense, a better word to describe it is a glassy look. 3D’s Ceramic Coating is a professional grade coating that’s easy enough to apply that anyone can do it even if it’s their very first time using a ceramic coating. And “yes” the protection and longevity far exceeds that of car waxes and synthetic paint sealants. And “yes”, the water beading is insane! But it’s the glass-like appearance that will impress you and your friends the most.
3D on the outside of the bottle means you can trust the product on the inside of the bottle.
- True ceramic coating with true 9h hardness
- Has a melting point of 4,950 degrees Fahrenheit (2,730 degrees Celsius) and the resulting finish is a 9 on the Mohs Hardness Scale.
- Superior gloss that holds up over time much better than competitors.
- Superior paint adhesion, which maximizes coating longevity.
- 3D Ceramic Coating creates an incredibly high contact angle, which creates an insane super-water-beading-hydrophobic-surface, where the water beads are tight, tall, and small.
- Creates a self-cleaning effect any time it rains for a cleaner car.
- Makes future washing and drying faster, safer, and easier
- 2-year protection and even longer – depends on how car is washed.
- Green technology, Earth friendly – Prop 65 and V.O.C. compliant.
Directions:
IMPORTANT: Always work on a cool clean surface in the shade. The surface must be completely clean and decontaminated.
Step 1: Using multiple clean microfiber towels, prep the car’s paint by carefully wiping it down using 3D WIPE. This is a paint-safe water-based solvent that removes any unwanted residues that could interfere with the proper bonding of the 3D Ceramic Coating to the paint surface.
Step 2: Wrap the 3D Suede Applicator around the 3D foam block and apply enough coating to cover the flat surface of the suede cloth.
Step 3: Start at the highest point, (usually the roof) and work your way down and around the vehicle. After the roof, coat horizontal panels like the hood and trunk lid next. After the horizontal panels, tackle vertical panels like fenders, doors, hatchbacks, and the grill area. Divide larger panels into smaller sections, no larger than 2’ by 2’ and work section-by-section. 3D Ceramic Coating can be used on all painted surfaces as well as other hard smooth surfaces.
Step 4: Using a crosshatch pattern (side-to-side and then front-to-back strokes), spread the coating evenly over a section of paint.
Step 5: Wait 30 to 45 seconds and then gently wipe the treated area with a clean, soft microfiber towel. Use available ambient light or light from a handheld source, carefully inspect this area to make sure there are no high spots left on the surface. If you discover any high spots, simply re-wipe this area with a clean, soft microfiber towel.
Step 6: Continue working around the car and add more coating to the suede applicator as needed. If you see the suede applicator become contaminated, switch to the other side or switch to a new, clean suede applicator cloth.
Full Cure Time - After the final wipe, do not wash the car or drive in inclement weather for at least 72 hours, (3 days), and optimum wait time is 5 days, (120 hours).
SDS SHEET:
3D Ceramic Coating
