Poly Magic is a super-quick high-gloss polymer finishing spray, for use on exterior
surfaces, that provides a lasting shine to exterior paint, plastic and chrome. Enhances
rubber side molding and trim without blushing or whitening. Nonabrasive. Easy to use;
just apply to exterior surfaces, wipe on then wipe off. Use after every wash to maintain a
showroom finish.
DIRECTIONS:
Shake product well. Lightly mist product onto the surface. Immediately wipe product into the exterior surfaces using soft towel. Allow polymer product to come to slight haze, then wipe or buff to a high-gloss with a second towel that is clean, soft and DRY to remove any excess product. For optimal performance, use on a vehicle that has been properly cleaned and dried. This product can be used on a slightly damp surface.
NOTE: The haze will be slight as this product is a polymer, not a traditional carnauba wax. To avoid streaking, it is best to remove product once hazed. Use only a small amount of product, or enough to spread over applied area. Do not use on a HOT SURFACE.
SURFACE APPLICATIONS:
For express, deep, high-gloss, and added surface protection of clearcoat, single stage, acrylic, lacquers, enamels, as well as powder-coated paints. Also, performs well on exterior chrome plastic and rubber.
ADDITIONAL USES:
Excellent on RVs, boats, motorcycles, bikes, and other painted and clearcoat surfaces.
HELPFUL TIPS:
To ensure the highest performance of #63-QT Poly Magic it is best to remove all surface
contamination with Clay Magic® #2200 fine detailing clay prior to application. Do not
apply 63-QT in thick layers. Do not apply to hot surfaces. Product can be used in the
sunlight if the surface is not hot.
SDS SHEET:
Poly Magic™