Professional-Grade Oil & Grease Stain Remover for Hardscape Surfaces
Trident Safe Harbor™ is a professional-strength oil spot cleaner engineered to remove stubborn petroleum-based and food-based oil stains from concrete, pavers, natural stone, travertine, exposed aggregate, and other hardscape surfaces. Unlike many harsh degreasers that can leave residue behind, Safe Harbor features Clean Rinse Technology, allowing dirt, grease, and cleaner residue to rinse away quickly with minimal effort.
Its ready-to-use, no-dilution formula penetrates deep into porous surfaces to dissolve, encapsulate, and lift embedded oil contamination while maintaining a surface-safe alkaline chemistry when used as directed. Whether you're restoring a residential driveway, commercial parking lot, restaurant patio, garage floor, pool deck, or outdoor entertainment area, Safe Harbor delivers professional cleaning performance without the hassle of mixing.
For complete surface restoration, follow spot treatment with Trident Wipe Out for an overall cleaning or Trident White Water if efflorescence or mineral staining is present.
Why Choose Trident Safe Harbor?
✔ Removes petroleum oil stains, motor oil, hydraulic fluid, transmission fluid, cooking oils, grease, and food-based oils
✔ Professional-strength solvent-based formula for deep penetration
✔ Ready-to-use — no mixing or dilution required
✔ Clean Rinse Technology minimizes residue and speeds cleanup
✔ Biodegradable cleaner residue
✔ Phosphate-free formula
✔ Alkaline chemistry helps neutralize acid cleaner residue
✔ Safe for most masonry and hardscape surfaces when used as directed
✔ Ideal for homeowners, contractors, pressure washing professionals, municipalities, HOAs, and commercial property maintenance
Best Uses
Trident Safe Harbor is ideal for removing:
- Motor oil stains
- Engine oil
- Hydraulic fluid
- Transmission fluid
- Diesel residue
- Grease spots
- Cooking oil spills
- Restaurant grease stains
- BBQ grease
- Automotive maintenance stains
- Garage floor oil stains
- Driveway oil spots
- Parking lot oil contamination
Recommended Surfaces
Safe Harbor is formulated for use on:
- Concrete driveways
- Concrete sidewalks
- Garage floors
- Stamped concrete
- Concrete wall block
- Clay pavers
- Brick pavers
- Natural stone
- Manufactured stone
- Travertine
- Exposed aggregate
- Patios
- Walkways
- Pool decks
- Commercial hardscapes
Do NOT use on asphalt.
Important: Exercise caution on sensitive decorative surfaces including wet-cast pavers and stamped concrete, as discoloration may occur.
Professional Features
Clean Rinse Technology
Unlike conventional degreasers that leave behind sticky residue, Safe Harbor rinses clean with either hot or cold water, reducing cleanup time while improving overall results.
Deep Oil Penetration
The solvent-based chemistry penetrates below the surface to loosen embedded oil contamination instead of only cleaning the surface.
Ready-to-Use Formula
No measuring.
No dilution.
No complicated mixing.
Simply apply directly from the container.
Biodegradable Cleaner Residue
Cleaner residue breaks down rapidly in soil, making cleanup easier after rinsing.
Non-Damaging Alkaline Formula
Safe Harbor utilizes alkaline chemistry that helps reduce the risk of surface damage associated with many acid-based cleaners when used according to directions.
Coverage
Coverage varies depending on surface porosity, stain severity, and texture.
Average Coverage per Gallon:
- 100–240 sq. ft.
- 9.3–22.3 m²
Severely stained areas may require additional applications.
Application Instructions
- Remove loose dirt and debris from the surface.
- Apply Trident Safe Harbor directly onto the oil stain.
- Allow the product to penetrate the contaminated area.
- Agitate using a clean, stiff-bristle brush.
- Rinse thoroughly using a hot water pressure washer for best results.
- Cold water pressure washing or a garden hose may also be used when necessary.
- Repeat for deeply embedded or older stains if needed.
- After spot treatment, clean the entire surface using Trident Wipe Out or use Trident White Water if efflorescence is present.
Equipment Recommended
- Stiff-bristle brush or push broom
- Hot water pressure washer (recommended)
- Cold water pressure washer
- Garden hose (alternative)
Ideal Applications
- Residential driveways
- Commercial parking lots
- Auto repair shops
- Fleet maintenance facilities
- Gas stations
- Restaurants
- Loading docks
- Warehouses
- Equipment yards
- HOA common areas
- Property management maintenance
- Pressure washing contractors
- Hardscape restoration professionals
Frequently Asked Questions
Does Safe Harbor remove old oil stains?
Yes. It is designed to penetrate and dissolve both fresh and aged petroleum and food-based oil stains. Older stains may require multiple treatments.
Does it require dilution?
No. Safe Harbor comes ready to use directly from the container.
Can I use it on pavers?
Yes. It is suitable for clay pavers, concrete pavers, and many natural stone surfaces.
Can I use it on asphalt?
No. Safe Harbor should not be used on asphalt surfaces.
What works best for rinsing?
A hot water pressure washer provides the fastest and most effective results, although cold water pressure washers or a garden hose can also be used.
Why Contractors Choose Trident Safe Harbor
Professional contractors trust Trident Safe Harbor™ because it delivers reliable oil stain removal without complicated mixing or aggressive acids. Whether you're restoring a customer's driveway, cleaning restaurant grease stains, or preparing pavers before sealing, Safe Harbor provides the cleaning power professionals demand while helping protect valuable hardscape surfaces.
